Product Details:
Payment & Shipping Terms:
|
Features: | Steady Running,small Noise,convenient Operation | Diameter: | Disc Diameter φ203mm |
---|---|---|---|
Speed: | Rotation Speed 1400rpm | Power Supply: | AC220V/50HZ/1Ph |
Motor: | 360W | Application: | Colleges And Universities,scientific Research Institution |
High Light: | metallographic polishing machine,grinder polisher machine |
XGrind-304 Metallographic Polishing Machine with Double Disc 203mm Fixed Speed 1400rpm
Technical Data Download: iqualitrol Grinding and Polishing Machine XGrind-304
Brief Introduction:
In the process of Metallographic sample preparation, polishing is a main procedure. After polishing on the machine,the sample surface is like a mirror. XGrind-304 Metallographic sample polishing machine is a classic polishing equipment with steady running,small noise,convenient operation and maintenance.
XGrind-304 meets the polishing requirement of all kinds of materials.This machine is suitable for factories and mines enterprises,colleges and universities,scientific research institution.
Technical Parameters:
Model | XGrind-304 |
Grinding/polishing disc diameter | φ203mm |
Rotate speed: | 1400r/min (900r/min alternative) |
Input voltage | AC220V 50HZ |
Disc quantity | 2 |
Motor: | 360W |
Dimension | 570mm x910mm x1100mm |
Net weight | 74kg |
Specimen Polishing:
Polishing discs are covered with soft cloth impregnated with abrasive diamond particles and an oily lubricant or water lubricant.
Particles of two different grades are used: a coarser polish - typically with diamond particles 6 microns in diameter which should remove the scratches produced from the finest grinding stage,
and a finer polish – typically with diamond particles 1 micron in diameter, to produce a smooth surface.
Before using a finer polishing wheel the specimen should be washed thoroughly with warm soapy water followed by alcohol to prevent contamination of the disc. The drying can be made quicker using a hot air drier.
Mechanical polishing will always leave a layer of disturbed material on the surface of the specimen. Electropolishing or chemical polishing can be used to remove this, leaving an undisturbed surface.
HPA-1 Metallographic Grinding Machine designed through various investigation and gathering opinions and requirements of various users. Adapt to the needs of grinding more material. The disc diameter greater than the domestic similar products. The speed of the mill is different from domestic products, is an excellent sample grinding equipment.
Contact Person: Mr. Raymond Chung
Tel: 86-13711988687
Fax: 86-769-22784276